Using the digital inking pen on the digital pad produces both familiar ink notes on ordinary paper and digital pages in the storage device of the pad.

 

Note! The DigiMemo is a stand-alone device. You do not need to connect the digital pad to your computer for this function.

 

 

 

Turning on the Digital Pad

 

Press and hold the Power button on the digital pad until the  icon appears on the display. Release the Power button to turn on the pad. The display will be on and show the Digital Page Number, Page icon, Storage Device icon, Time display and Battery icon.

 

Note! The digital pad cannot be turned on when connected to a PC.

 

Storage Device Icon

Without loading an optional SD memory card, the Storage Device icon is displayed and the built-in 32 MB storage device is the current storage device. Your handwritten notes will be stored in the built-in 32 MB storage device.

 

With loading an optional SD memory card, the Storage Device icon is displayed and the optional SD memory card is the current storage device. Your handwritten notes will be stored in the optional SD memory card.

 

Digital Page Number

 

The Digital Page Number indicates the current digital page in the current storage device. Your handwriting will be captured and stored in the current digital page in the current storage device (the built-in 32 MB storage device or the optional SD memory card).

 

The digital pad can manage up to 999 digital pages for each storage device (the built-in 32 MB storage device or the optional SD memory card).

 

 

Page Icon 

 

The Blank Page icon indicates that the current digital page contains no digital ink.

The Page with Contents icon indicates that the current digital page contains digital ink.

 

Battery Icon

 

The Battery icon indicates the battery strength in the digital pad.

 

 

Changing the Current Digital Page

 

 

You can use the following function buttons on the pad to change the current digital page in the current storage device.

 

 

Page Backward Button

Press the Page Backward button to move to the previous digital page. By pressing and holding the Page Backward button , the Digital Page Number moves fast and backward. Once release the button , it stops moving.

 

 

Page Forward Button

Press the Page Forward button to move to the next digital page. By pressing and holding the Page Forward button , the Digital Page Number moves fast and forward. Once release the button , it stops moving.

 

 

Next Blank Page Button

Press the Next Blank Page button to move to the next blank digital page

 

 

The Pen Icon

 

When you are writing or drawing on paper by using the digital pen on the digital pad, the Pen icon appears on the display. The Pen icon indicates that the digital pad is capturing and storing your handwriting as digital ink.

 

Note! If you do not see the Pen icon while writing, try to alter the pressure you apply on the pen tip.

 

 

 

Writing Your Notes on a New Page

 

By using the , or function button, select any blank digital page in which you want to store a new page of your handwritten notes on paper. We recommend you to put down the same page number on this new page of paper as the Digital Page Number. It helps you to synchronize your paper notes and digital pages.

 

Under the current Digital Page Number displayed, everything you write will be immediately captured and stored in the current digital page file of the current storage device.The file name of this digital page is PAGE_XXX.DHW (the XXX is the Digital Page Number such as 001).

 

While the Storage Device icon is displayed, the digital page file is stored in the DMEMO-M folder in the built-in 32 MB storage device.

 

While the Storage Device icon is displayed, the digital page file is stored in the DMEMO-S folder in the optional SD memory card.

 

Note! To avoid creating a superimposed digital page, make sure that you select a blank digital page each time you change a page on paper.

Note! As you will see later, it is quite important to keep your written page number and the Digital Page Number aligned. For example, you can know the contents in the digital page from the page number that you wrote on paper.

 

Note! If you frequently alternate the built-in 32 MB storage device and an optional SD memory card, we recommend you to write the page number like “Page M24”, “P M24”, “Page SD24”, “P SD24” … etc. It is more convenient for you to know which storage device the digital page is stored in.

 

Note! The more you write on a digital page, the bigger size of the digital page file will be.

 

 

Writing Your Notes on a Page Already with Contents

 

Anytime you can switch to the paper page already with the contents and continue to write your notes. Moreover, use the or function button to move the Digital Page Number to the one same as you wrote on the paper page. Now, start to write! Through this way, your new handwriting will be captured and stored in the right digital page.

 

 

Erasing a Digital Page on the Digital Pad

 

Erasing a digital page is similar to tearing off a paper page. By using the or function button to move the Digital Page Number to the one which you want to erase.

 

Then press the Erase button on the pad. The display will show message. Press the Erase button again to erase all contents stored in the digital page.
 

 

Here is a brief recommendation: you may want to tear off the paper page or simply cross out the page number you wrote on the paper page.
 

 

Note!When message appears, the erase procedure will be cancelled if you write or press any button , or to execute other functions. All contents remain intact in the digital page.
 

 

Note! Once a digital page is erased, its original contents can not be recovered.

 

 

Turning off the Digital Pad

 

Press the Power button to turn off the digital pad. The display will be blank.

If you have not written or pressed any function button within the previous 30 minutes, the digital pad sounds a beep and automatically shuts down. The display will be blank.

Note! Since the pad has the automatic shutdown capability, please make sure that the display is on if you want to write again after a long period of time.

As you turn on the digital pad, the display will show the last Digital Page Number at the time it was turned off.

 

 

Setting the Date and Time

 

The dates created and modified for the digital page file are recorded according to the clock in the digital pad.

1. Turn off the digital pad.

2. Press and hold the button on the digital pad. Then press the Power button until the year digits flash on the display.

3. Repeatedly press or hold down the or button to set the year.

4. Press the button . Then the month digits flash.

5. Repeat Step 3 and 4 to set the month, day, hour, minute, second and year cyclically.

Note! Only 24-hour format is available.

6. Press the button during the setting. The date and time adjustment will be stored. Then the digital pad will be turned on and the current time appears on the display.

 

 

Note! If you turn off the digital pad during the setting, the date and time adjustment will be not stored. The clock automatically returns to the previous setting.

 

 

 Low Battery Indication on the Digital Pad

 

When the batteries remain too low power and are in need of replacement, the Low Battery icon will appear on the display. Please replace the batteries in the pad.

 
When the batteries are exhausted, the pad sounds 3 beeps. Then the pad is turned off immediately.

 

 

 

  

Full Memory Indication

 

The 90% icon will appear to indicate that 90% capacity of the current storage device ( or ) is used.

 

The Full icon will be shown if the memory is full in the current storage device ( or ). If that is the case, the digital pad can not store your new handwriting. Also, if you still keep writing, the pad sounds 2 beeps.

 

Note! Under such circumstances, you need to erase unwanted digital pages if you want to continue to write.

 

Note! In the following chapter, you will find that it is very easy to import, copy, move and delete the digital pages when connecting the pad to your PC through USB cable.