DocuPen RC800 is equipped with 8MB on-board Flash-memory and a slot for externalMicroSD memory card which gives you almost unlimited capacity.

The MicroSD memory card slot is located on the right-hand side of the DocuPen underthe removable cover.

To remove the cover you have to place your index finger on the right side of the cover(just above the USB port) and gently lift up.

The cover detaches and you see the MicroSDmemory slot covered by the cradle.

Open Cover/ External memory slot

You will see the compartment for the memorycard.

Place the MicroSD card in the slot, sliding it to the right. Close the DocuPen cover.

Note: Newly inserted external memory must be formatted beforeit is recognized by the Docupen

The formatting of the memory is accomplished by choosing the recycle symbol in theDocupen scanner control window to erase the DocuPen memory which also formatsthis new memory. (See Erasing the DocuPen Memory in this manual for more details)